Bridge 400

System-type wheel washer with a modular structure that can be customized according to every working site

Attachable conveyor tank
Serially extendable main frame
Various pump options
Emergency stop button
Automatic operation with photo sensor
Checks washing times with a counter
Versatile application with modular structure
Maximizes durability with zinc galvanizing
Maximizes washing of all tire surfaces and the bottom of the vehicle with a total of 196 nozzles

Dimension		W4,420 x L6,455 x H3,088 (mm)
Applicable vehicle		Width of truck Max. 2,800mm
Power consumption		33.0Kw/h
Gross weight		Body 6,000Kg Conveyor tank 2,700Kg
Sensing		Dual Photo Sensor (Entrance & Exit)
Submersible pump		5.5Kw x 380/460V x 3ø x 50/60Hz: 2set (Vertical) – Option 11Kw x 380/460V x 3ø x 50/60Hz: 2set (Horizontal) – Option 15Kw x 380/460V x 3ø x 50/60Hz: 2set (Horizontal) – Standard
Air compressor		2.2Kw x 380/460V x 3ø x 50/60Hz
Scraper Drive Motor		0.75Kw x 380/460V x 3ø x 50/60Hz (Ratio: 1/173)
Water jet pressure		2.5 ~ 3.0 Kg/cm²
Main power		380/415V x 3ø x 50/60Hz
Water tank volume		6,000 Liters
Washing capacity		Over 500 Vehicles/Day
Nozzle		Side pipe – 68pcs, Main frame – 136pcs
Side screen		1 layer {Total 1.7m(H)}
Side pipe		2 inches x 1,200 mm (H) x 2 layer pipes
Pipe linking		Multi – joint type
Control panel		Stainless Steel (SUS 304)/ Dual door
Traffic light (option)		3-color traffic signal light
Heater (option)		3Kw x 380/460V x 3ø x 50/60Hz

A truck enters slowly into the wheel waasher with a speed of 5km/h and stops infront of the sensor momentarily.

The washer washes both the front and rear wheels while the truck passes, and the truck advances to the road.

The sensor detects the truck, and then the washer sprays water and washes the truck as it passes slowly.

Bridge 400